Using your FarmCam IP

Spare parts and accessories for FarmCam IP
All parts included in the farmCam IP are available as spare parts, please see the “What is included” section. There are also a number of accessories to ...
Fri, 19 Jan, 2018 at 4:19 PM
How to view the image from the camera
To view an installed camera, open the app, locate the camera name and tap the snapshot or icon below the camera name. If the Disconnected icon is sho...
Thu, 7 Jul, 2016 at 2:05 PM
Motion detection
The motion detection is set up under Sensitivity Setting in the Advanced Settings menu. For the camera you wish to enable motion detection, tap the C...
Wed, 13 Dec, 2017 at 9:00 AM
App version
Information about the app version can be found by tapping the i button at the bottom right of the app. Select About to see the version information....
Thu, 7 Jul, 2016 at 2:30 PM
Push settings
You can receive push notifications in your phone/tablet when the camera detects a motion. Note that the motion detection must be switched on first (see th...
Thu, 7 Jul, 2016 at 2:19 PM
Recording
The camera can record when a motion is detected. To set up this function, see the “Motion detection” section. The camera has no internal memory, so an ...
Thu, 7 Jul, 2016 at 2:20 PM
Advanced Settings menu
Admin Password: Here you can change the password for entering the Advanced Setting menu Time Zone: Set the appropriate time zone for your location. This...
Wed, 22 Nov, 2017 at 4:12 PM
Reset of camera
The camera can be reset by pressing and holding the button on the power cable until the red LED starts to blink. All settings are reverted to factory defa...
Thu, 7 Jul, 2016 at 2:26 PM
Delete an installed camera
To delete an installed camera, tap the Settings button. Then tap the Trash can button. You will now be asked to confirm that you want to delet...
Thu, 7 Jul, 2016 at 2:29 PM
PIN code
The app can be protected with a PIN code. To set up the PIN code, tap the i button at the bottom right of the app. Select Setup PIN Lock. You will no...
Thu, 7 Jul, 2016 at 2:29 PM