Using your MachineCam

Spare parts and accessories
All parts included in the machineCam are available as spares, please see the “What is included” section. There are also a number of accessories to the m...
Fri, 6 Oct, 2017 at 1:49 PM
How to start
The machineCam system is very easy to handle. Make sure the camera and the monitor are safely fastened and connected to power sources. The monito...
Thu, 7 Jul, 2016 at 5:30 PM
Navigating the channels
By pressing any of the arrow buttons, the monitor will circle through all channels. After Channel 4 there is a Scan mode where the monitor loops throug...
Thu, 7 Jul, 2016 at 5:34 PM
Dual camera mode
By pressing the square button, the monitor will enter the dual screen mode which shows two cameras simultaneously. When in dual screen mode, the left arro...
Thu, 7 Jul, 2016 at 5:45 PM
Menu options
The menu is accessed by pressing the circular button. NOTE: Do not press and hold – this will turn the monitor off. The eight menu categories will be...
Thu, 7 Jul, 2016 at 5:49 PM