Installing your MachineCam Mini

Quick install guide
The attached Quick Installation Guide describes the following: How MachineCam Mobility works What's included in the box Installation of MachineCam ...
Thu, 27 Sep, 2018 at 9:13 AM
Introduction
The products of LUDA.Farm AB operate on the 2,4 GHz frequency. The product is CE-certified which means that it fulfils all established rules and demands f...
Fri, 15 Jul, 2016 at 7:19 PM
Safety precautions/Important information
Always use the correct power adaptor for each product. The products will be damaged if they are supplied with wrong voltage! Read the whole use...
Fri, 15 Jul, 2016 at 7:21 PM
What is included in your MachineCam Mini box
Your MachineCam Mini solution includes the following products: 1x Camera (Art. no 2006) 1x Monitor. (Art. no 3006) 2x small antenna (Art. no 501...
Wed, 27 Sep, 2017 at 9:06 AM
The camera functions and parts
The camera can be angled in different positions depending on where it is being mounted. Loosen and/or move the adjustment screws until desired angle is ac...
Fri, 15 Jul, 2016 at 7:22 PM
The monitor functions and parts
Menu on/off click “MENU” Step up/down in menu, click arrow up/arrow down Power on, press and hold the button in the bottom on the left...
Fri, 15 Jul, 2016 at 7:30 PM
Planning the placement of camera & monitor
The illustration above is an example on how to mount your camera and monitor. Due to the length of the camera power cable, the camera should be placed at a ...
Fri, 15 Jul, 2016 at 7:31 PM
Installation of the monitor
Mount the monitor foot and attach the monitor. Make sure everything is properly fitted and steady. Connect the cigarette adapter to the cigarette li...
Fri, 15 Jul, 2016 at 7:33 PM
Installation of the camera
When installing the camera, especially trying out the correct positioning of the camera, we recommended getting help from a second person. One person hold...
Fri, 15 Jul, 2016 at 7:38 PM
Pairing camera and monitor
Connect the camera to a power source according to the instructions in on page 7. On the monitor, click the PAIR/CH button and go to the channel wh...
Fri, 15 Jul, 2016 at 7:41 PM