Installing your MachineCam Mobility

Quick install guide
The attached Quick Installation Guide describes the following: How MachineCam Mobility works What's included in the box Installation of MachineCam ...
Thu, 27 Sep, 2018 at 9:12 AM
Introduction
The products of LUDA.Farm AB operate on the 2,4 GHz frequency. The product is CE-certified which means that it fulfils all established rules and demands f...
Wed, 8 Mar, 2017 at 3:46 PM
Safety precautions/Important information
Always use the correct power adaptor for each product. The products will be damaged if they are supplied with wrong voltage! Read the whole user guide befo...
Wed, 8 Mar, 2017 at 3:45 PM
What is included in your MachineCam Mobility box
Your MachineCam Mobility ( Art. no 1070) solution includes the following products: 1x Camera (Art. no 1045) 1x Monitor. (Art. no 1057) 2x sm...
Wed, 27 Sep, 2017 at 9:05 AM
The camera functions and parts
The camera can be angled in different positions depending on where it is being mounted. Loosen and/or move the adjustment screws until desired angle is achi...
Wed, 8 Mar, 2017 at 3:56 PM
The monitor functions and parts
Menu on/off click “MENU” Step up/down in menu, click arrow up/arrow down Power on, press and hold the button in the bottom on the left side Change c...
Wed, 8 Mar, 2017 at 3:57 PM
Planning the placement of camera & monitor
Information The 2,4 GHz frequency signals are sent as radio waves in the air. The waves can penetrate most objects or bounce around them. However, the sign...
Fri, 6 Oct, 2017 at 2:08 PM
Installation of the monitor
Mount the monitor foot and attach the monitor. Make sure everything is properly fitted and steady. Connect the cigarette adapter to the cigarette lighte...
Wed, 8 Mar, 2017 at 4:02 PM
Installation of the camera
When installing the camera, especially trying out the correct positioning of the camera, we recommended getting help from a second person. One person holds ...
Fri, 6 Oct, 2017 at 2:11 PM
Pairing camera and monitor
Connect the camera to a power source. On the monitor, click the PAIR/CH button and go to the channel where you wish to install your camera. Press and ...
Fri, 6 Oct, 2017 at 1:19 PM