FAQ - FarmCam Mobility

How to use a different SIM card
If you want to use a different micro SIM card then the one included in the FarmCam Mobility package it will work automatically with the operators in the lis...
Tue, 16 Feb, 2021 at 11:25 AM
How to improve live video stream when 3G/4G coverage is weak
If the network coverage is weak it is good to lower the quality of the image to get a better live video stream. Go to settings and follow the steps belo...
Thu, 19 Mar, 2020 at 4:37 PM
Reset the camera
Note that after the reset the camera will go back to factory default settings. 1. Open the back cover. 2. Make sure that the camera is powered and...
Mon, 11 May, 2020 at 9:31 AM
How much can be recorded to a SD card?
FarmCam Mobility records motion events in clips between 6 seconds and 5 minutes (if continuous movement).  A 16 GB SD card can save up to 1389 minutes of fu...
Thu, 16 Jan, 2020 at 2:07 PM
Set up email notifications
To set up email email notifications for FarmCam Mobility via the app follow the steps below: 1. Enter settings by pressing the gear icon.  2. Select Em...
Wed, 23 Sep, 2020 at 3:49 PM
How to use Gmail for email notifications
If you want to use a gmail account for sending email notifications from the app FarmCam 2.0 you need to create a dedicated App Password for the gmail accoun...
Fri, 19 Feb, 2021 at 8:05 AM
How to translate data to viewing time
The table below shows the data plans available for FarmCam Mobility and how it translates to viewing time per month.
Thu, 16 Jan, 2020 at 11:23 AM
Charging time of the rechargable battery
If the camera is not used during the charging, it takes 5 hours to recharge the battery in room temperature with the power adapter included for FarmCam Mobi...
Tue, 28 Apr, 2020 at 1:26 PM
SolarCharger stops charging FarmCam Mobility
There can be a few different reasons for SolarCharger to stop charging FarmCam Mobility. Below you find a lis of possible resons that you can go through to ...
Tue, 7 Apr, 2020 at 3:41 PM
PIR and push notifications
The camera has a PIR sensor, which means that it can react on living beings in front of the camera. The PIR is enabled by default. If you do not want the ca...
Wed, 29 Apr, 2020 at 3:18 PM