Setting up the camera
- Attach the camera to the wall using the mounting foot. Make sure there is a power source nearby and that the antenna cable reaches the camera from the point where you intend to mount the antenna.
- Connect the 16m antenna cable to the back of the camera and attach the large antenna to the cable. Do not mount the antenna permanently yet.
- Connect the camera to a power source using the 5V outdoor power adaptor.
- Turn on the LCD monitor. The camera picture should show up automatically on the display after a few seconds. Adjust the camera angle if necessary.
Did you find it helpful?
Sorry we couldn't be helpful. Help us improve this article with your feedback.