Step 1: Connect the Receiver to a Monitor or TV



Use the HDMI cable (included) to connect your farmCam HD Receiver to the TV HDMI port.

Alternatively use VGA: Use the VGA cable to connect your farmCam HD Receiver to the VGA port of TV or Monitor.


Step 2: Connect the IP Camera Power Adapter

Connect the camera’s power adapter to power the camera, please use 12V/1A Power Adapter (included)

 

Step 3: Connect to your network

Connect an Ethernet cable from the LAN port of the farmCam HD Receiver to LAN port of your router.


Step 4: Connect the Mouse

Connect the mouse to the USB Port. 

Step 5: Connect the Receiver Power Adapter.

Connect the Receiver power adapter to power the Receiver, please use 12V/2A Power Adapter (included).


Step 6: Install the Outdoor Antennas 

Tip: Place the outdoor antennas on the outer wall of the buildings, with as few obstacles between them as possible.

 

Please find a more detailed antenna installation guide below:

http://support.luda.farm/support/solutions/articles/14000073666-antenna-installation-guide/